Parkerdawson.com
May 20, 2012, 10:01:58 am *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News:
 
   Home   Help Search Gallery Login Register  

Pages: [1]
  Print  
Author Topic: painting my boat  (Read 351 times)
robisons
Supporter
Newbie
*****

Treasure: 0
Last Login:May 14, 2012, 10:25:18 pm
Posts: 15



Activity
3%
Respect: 0

View Profile
« on: October 18, 2011, 12:43:23 am »
0

i have been working on hull #106. i am painting the boat with interlux paint. been reading don casey, the good old boat. he says you can paint an old boat for a couple hundred bucks. maybe in 1968 but not today. there have been times when i wondered why i would take on such a project, but this afternoon after 9 more hours of working on her i stood back and took a look. i think i had a pretty good smile on my face. the paint job is almost complete and the old boat is looking really good.i think she would be the best looking midship 25 at my marina when i get her there. in fact she will be the only one i am sure. does anyone know how many of these boats are still around? i am painting the non skid with beige non skid and the rest of the deck with off white. lots of taping off. rebedding all hardware.
josh_richard
Jr. Member
**

Treasure: 1
Last Login:October 22, 2011, 12:12:15 pm
Posts: 79



Activity
4%
Respect: 0

View Profile WWW
« Reply #1 on: October 18, 2011, 02:56:44 pm »
0

This is fantastic.  I wish you the best of luck.  Is your boat on a trailer?  How did you get the bottom painted while on the trailer?

Regarding who may have other midship 25's, my friend was at Bayfield race week in the Apostle Islands (http://www.apostleislandsmarina.com/index.html).  While swimming around, he noticed a midship 25 at a dock, swam up to the owner and had a chat.  Are you out there?

The owner commented on how poorly his boat went upwind.  My boat (Dawson 26) goes upwind fine and has older sails. Not sure what is up.  Would welcome the conversation.

I enjoy the Casey book.  I also have Sailboat Electrics Simplified by Casey.  Easy read.

-josh richard

 
rdubuque
Moderator
Sr. Member
*****

Treasure: 1
Last Login:May 18, 2012, 12:15:10 pm
Posts: 297



Activity
7.6%

S/V Surrender

Respect: 0

View Profile
« Reply #2 on: October 18, 2011, 04:43:49 pm »
0

One way to get bottom paint on where the bunks hit is to put the boat in the water with the boat still attached at the bow.  Then take a halyard (mast is up) and with some help pull the boat over on its side a bit and drive the trailer out of the water.  This will allow you to crawl under and get some paint on the other parts of the boat.  This can be done to change the thru hull for the sink, which also sits on the bunk.

Post some pictures of your boat, would love to see your results. 

Bob
robisons
Supporter
Newbie
*****

Treasure: 0
Last Login:May 14, 2012, 10:25:18 pm
Posts: 15



Activity
3%
Respect: 0

View Profile
« Reply #3 on: October 18, 2011, 09:51:45 pm »
0

my boat is on a trailer with rollers so i have almost all of the bottom painted.just a few spots where the rollers are.i will try to post some pictures. my boat came with an outboard motor already installed on the boat. the inboard, prop shaft, and skeg where the cutlass bearing would have been were already removed. the cockpit port locker houses the engine controls. i hope that this set up works o.k. i plan to put my batteries where the engine would have been to help with ballast.i painted the boot stripes on yesterday but ended up being disappointed. the color i chose was flag blue. it turned out to be too dark for me so i plan to change the color to a lighter shade. hull is gloss white, deck is off white and non skid is sand beige. i have sent the bow and stern lights to a chrome shop and the bow and stern corner bumpers to a friend that is a painter to coat with epoxy.the previous owner told me that the keel cable was replaced 5 years ago. it looks to be in good shape.i can crawl underneath the trailer and look at the keel connection and it looks fine. no rust or anything like that. i am talking a lot here but if i don`t ask then maybe i will find out the hard way. the boat came from oxford md. i had to epoxy some hull damage on the port side where the old girl got some dock rash or something. maybe i can find some before and after pictures. i had planned to restore and sell the old boat but i am becoming attached more and more. still would like to know how many still exist. thanks. working on an atomic four for a friend tomorrow.




josh_richard
Jr. Member
**

Treasure: 1
Last Login:October 22, 2011, 12:12:15 pm
Posts: 79



Activity
4%
Respect: 0

View Profile WWW
« Reply #4 on: October 21, 2011, 06:59:53 pm »
0

This is sneaky.  I will try this in the spring when I touch up.

-Josh

 
josh_richard
Jr. Member
**

Treasure: 1
Last Login:October 22, 2011, 12:12:15 pm
Posts: 79



Activity
4%
Respect: 0

View Profile WWW
« Reply #5 on: October 21, 2011, 07:00:41 pm »
0

Once sailed, these boats are hard to let go of.  They are a very good short hander's 26.  I am glad you are painting the bugger.

-josh

 
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by S M F | © Parkerdawson.com | Sitemap Valid XHTML 1.0! Valid CSS!